hayward swimming Pool Filter help?

It is a cartridge filter, I drained the water hosed the filter off, put it back in and closed the tank, let it fill bleeded it out so no air, when I turn the pump on a loud humming and vibration comming from the very top of the Filter Tank were the bleeder valve is, I taped it it goes away but than comes back, have done this many times but this is the first time with the loud humming from the top of the filter tank, you can hear it a block away, thanks for ant help........all the hoses are clear there are no obstructions, its a Above Ground Pool .

Put some vaseline where it seals. Or go to Poolcenter.com and look around.

For More Information on Clear Pool Filter Follow The Links Below-

Clear Pool Filter Article

How to Clean a Cartridge Swimming Pool Filter

A clean swimming pool filter is a key element for having a clean and sparkling pool all year round. Neglecting the pool filters will result in constant struggles with the swimming pool and could cause many other costly problems. Following are the basics of cleaning a cartridge swimming pool filter.

Turn off the pool equipment – turn off the main circuit breaker for the swimming pool equipment or the circuit breaker at the pool equipment if needed, but make sure the pool equipment does not start up while the cartridge filter is apart

Relieve the pressure from the system – open up the pressure relief valve on the main filter in order to release all the pressure from the system.

Drain the water from the cartridge filter – unscrew and remove the drain plug from the filter housing in order to completely drain the filter of water.

Open the filter housing - once all of the water is drained and pressure released from the filter, carefully open up the filter housing.

Remove the dirty cartridge filters – carefully remove the dirty filter cartridges from the filter housing.

Thoroughly clean the cartridge filter element(s) – using a high pressure spray nozzle on the hose, thoroughly spray the cartridge elements down until as much of the dirt and debris as possible is removed and the water runs clear. For the best results, work from the top down and spray of the filter cartridges at a 45 degree angle.

Clean the filter housing – spray down the filter housing in order to remove any dirt or debris. Make sure the o-ring is clean in order to get a good and tight seal when the filter is reassembled.

Re-insert the clean filter cartridges – carefully re-install the clean filter cartridges in an opposite manner that they were removed.

Close and secure the filter.

Restart the pool equipment - when restarting the pool equipment, leave the pressure relief valve open until all the air has been purged from the filter.

Note the pressure - once the filter is up and running again, make a note of the pressure on the pressure gauge. When the pressure goes up 10psi, it is time to clean the cartridge filter again.

Establishing and sticking to a routine cleaning schedule for cartridge pool filters is half the battle when it comes to having a clean and sparkling swimming pool.

Remember, for best results when cleaning a cartridge swimming pool filter, read and follow the manufacturer’s instructions carefully. If the instructions have been lost or misplaced, contact the manufacturer for replacement instructions. Often times the manufacturers provide easy access to downloading the instructions from their web site.

About the Author

Dave LeBeau is a professional swimming pool technician sharing his experience and knowledge on the topic of swimming pool maintenance.

Below Are A Few More Clear Pool Filter Items:

« Previous12345...1516Next »

I hope the content and web links we have presented for Clear Pool Filter has been a nice help. If not, dont forget to go looking further more
through our web page to uncover a good deal more around Clear Pool Filter

Search For More Clear Pool Filter

by using the search box or links on the side of the page. Thankyou