does a 1994 mustang have a heater control valve?

i recently purchased a heater control valve for my mustang (3.8 liter), and am having a heck of a time trying to locate where it is on my mustang. i see the 2 lines going into the firewall and follow them until the go into the waterpump. i do not see anything resembling a heater control vale anywhere. any help would be greatly appreciated. thanks!
i know you can buy one, i have one in hand. how hard are they to install? are they just as tough to put in as a heater core?

most of them did ,but it would more than likely be in the heater box on that one,those were kind of hard to get to also,good luck.

For More Information on Control Valve Follow The Links Below-

Control Valve Article

A brief history for control valves

It is certain that the development of control valves is closely related to the industrial process. It is true that in ancient times, people have come up with the idea of regulating. People try to regulate the flow of water in rivers or streams by using large rocks or tree trunks to block the flow of water or change water flow direction at that time. And even there are some simple original control valves used for crop irrigation in Egyptian and Greek civilization. Afterwards, Romans developed a complex water system for crop irrigation and employed plug and Plunger Valve to prevent the reflux. Then the Industrial Revolution has proposed the development to a new stage. James Watt invented the first speed controller adjustment. People at that time tended to pay more attention on the regulation of flow.

A pump governor, as the fist control valve, was invented by William Fisher in 1880. This is a kind of self-control valve with a heavy hammer. When the pressure increases, the valve opening decreases under the effect of the heavy hammer in order to achieve a stable pressure. During the 1920s, ball valves are the most popular ones, together with single-port and double-ported globe valves with V-notch. When it came to be 1940s, diaphragm control valves and butterfly valves came into being to control the mass flow. The valve positioner was developed then. During the 1950s, three –way valves and cage valves were carried out to meet high requirements. In 1970s, cage valves, especially the eccentric plug valves were popular in many fields in industrial process. And since 1980, a variety of fine small control valve, control valve actuator are born aiming to reform the weight and height and circulation of control valves. When stepping into the 21st century, Field bus control valve has been applied. And it is certain that the requirement for the control valves would be higher in the future.

Control valves and the development of industrial process develop simultaneously. To improve the control quality, it is certain to take exact demands on control system and all the composition of the constituent parts. As the whole society keeps a quick pace, it is necessary to grasp the advanced technologies and employ them into practice. With the development of the control valves, it is obvious to develop all the time. Otherwise, the whole industry, even the whole society would not progress.

If you want to know about the mechanical  knowledge, please confirm at http://www.seekpart.com/

About the Author

SeekPart.com is the global B2B platform in the industry of mechanical parts. SeekPart aggregates the trade leads in this area, and our ultimate target is to benefit the buyers and sellers of mechanical parts by utilizing these leads through our online tools.

Below Are A Few More Control Valve Items:

« Previous12345...399400Next »

Watch A Control Valve Video
Lecture - 25 Flow Control Valves



We hope the information and links we have given for Control Valve has been a nice help. If not, dont hesitate to search further
through our web site to uncover a lot more regarding Control Valve

Search For More Control Valve

by using the search box or links on the side of the page. Happy Searching