Just drained in ground spa.?

I was able to find out how to drain the water from an in-ground spa. I have filled the spa back up, and when I turn the pump on to provide the jets and the automatic feed of the chemicals, all that happens is the water is drained back out of the pool. I have turned all valves back to the original position they were at before I drained the pool, but there is no water flow into the pool now.

I am using a WhisperFlo WFE-4 pump. There sounds to be some air in the pump lines, but I can not find the air-release valve to allow for this air to be pushed out.

Any help you can give me is appreciated.
The pump is a self priming pump.
I tried adding water to the line with a garden hose, it just drains right out. I have an automatic bromine feeder, and when I tried to add water through that, it just drains out as well. I am stumped on this one.

It sounds as though you drained it so far the lines are totally full of air. If there's a resevoir with a sight glass on the pump you need to remove the cover (take this opportunity to clean the basket) and fill the pump and lines from a garden hose, etc. Carefully replace the o-ring gasket and replace the cover, making sure it's tight. Now try to restart the pump and see if it'll suck enough water to maintain it's prime and start recirculating.

For More Information on Pump Wfe Continue On Below-

-Watch A Pump Wfe Video-

maye rifando faster z nm

Pump Wfe Article

We all trust the data and links we have included for Pump Wfe has been a beneficial help. If not, dont hesitate to browse further
through our web site to discover more related to Pump Wfe

Search For More Pump Wfe

by using the search box or links on the side of the page. Happy Searching